Many lockers for school are intended for practical as well as decorative purposes. Bright tangerine orange, sporty blue, bold pompom pink, and vivid fire-engine red are some possible choices, but so are more subdued colors such as dove gray, dark gray, and clean white. Many lockers are customizable by the consumer and can be painted a variety of colors depending on personal needs and choices. Locker Colorado
Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term. School Locker
Rebecca, I remember a previous post that a visitor found storage at the bus station, so I called to see if still available, and it is. Lockers are $3 for the first hour and $1 per hour after that. It's difficult to find storage short term because of security/liability, esp. since 9/11. If you are staying at a hotel, they will often keep your luggage for you short term. Locker
Bicycle lockers are usually in outdoor locations near railway stations and the like where people may want to store bicycles securely. They are often banked together, with individual lockers shaped like an isosceles triangle for efficient and compact storage of a bicycle. This triangular shape permits the lockers to be grouped either in a radial pattern (with the sharpest points of the lockers together), or in a row in alternating orientations. Locker CO

No matter the class size or variety, school lockers are a must. Between the mix of classes, clubs, sports, and productions, there are a lot of books, uniforms, bags, homework, jackets, and everything in between. A locker is a home base for not only schoolwork, but a social spot for friends, the one place where students know that they and their belongings are secure. From hallway lockers to locker rooms, from preschool through college, we have every kind of locker for school that you could possibly need. Locker Colorado
Shelving Rack & Lockers, Inc. has specialized in Warehouse Space Control since 1989. We maintain a large local stock of new and used storage equipment products from Ridg-U-Rak, Lyon, Penco, Akro-Mils, Rubbermaid, Louisville Ladders, J&L Wire Products, and more. Shelving Rack & Lockers is your one stop shopping source for all your storage equipment needs! We welcome orders of all sizes - small or large. Member of the Better Business Bureau.
Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together. Locker Colorado

Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together. Locker CO
Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked.

Problems donating? | Other ways to give | Frequently asked questions | We never sell your information. By submitting, you are agreeing to our donor privacy policy. The Wikimedia Foundation is a nonprofit, tax-exempt organization. The Wikimedia Endowment provides dedicated funding to realize the power and promise of Wikipedia and related Wikimedia projects for the long term. For more information, visit wikimediaendowment.org.
Locker doors usually have some kind of ventilation to provide for the flow of air to aid in cleanliness. These vents usually take the form of a series of horizontal angled slats at the top and bottom of the door, although sometimes parallel rows of small square or rectangular holes are found instead, running up and down the door. Less often, the side or rear walls may also have similar ventilation. Locker Colorado
Don't take chances with a small storage company that doesn't have the nationwide resources like CubeSmart to ensure that customer service is prioritized. We're in it for the long-haul and we recognize that your satisfaction is instrumental to our success. We think you should expect more from storage and our locations in and around Denver are ready to exceed your expectations. Locker Colorado
Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked. School Locker
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys. Locker Colorado
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood. Locker CO
Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.

AIS Shelving Division handles high-quality locker systems designed for use in athletic facilities, schools, retail environments and other commercial, military, industrial and institutional applications. For the best selection (featuring steel, plastic, and laminate) and pricing of storage lockers, cabinets, chests, accessories, furniture, shelves, and locks call AIS today to speak with our knowledgeable staff.
Bicycle lockers are usually in outdoor locations near railway stations and the like where people may want to store bicycles securely. They are often banked together, with individual lockers shaped like an isosceles triangle for efficient and compact storage of a bicycle. This triangular shape permits the lockers to be grouped either in a radial pattern (with the sharpest points of the lockers together), or in a row in alternating orientations. Locker CO

We have metal lockers for sale, yes, metal lockers that are designed for many applications like first responders of all types, school corridor lockers, employee lockers, high school lockers, Athletic lockers Footlockers, and Stadium® lockers that are ideally suited for athletic team rooms to store helmets, uniforms and gear for many different sports. Locker
×