Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers. Locker CO

Number of locking points: Locker doors may lock with either single- or three-point locking, but this is not normally chosen as a separate option, and the choice is usually dependent on the number of tiers in the lockers, or whether they are a high-security model, although some manufacturers do allow purchasers to specifically choose an option here that goes against their normal practice. Single-point locking locks the door at only the point where the latch engages with the door-frame, whereas three-point locking uses extensible steel rods to lock the top and bottom of the door as well. School Locker
Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.

I have 4 kids under age 5 and was constantly bothered by their coats and shoes being lost all over the house. This has been fantastic for organizing all their hats, gloves, shoes, boots, coats, jackets, backpacks, etc. It has held up very well despite being packed with more than I ever expected to fit in it. The kids know as soon as they walk in the door to go hang up their coats and backpacks and to put their shoes in their cubbies. I anticipate being able to use this for at least 10 years to come. It's incredibly sturdy and well-made. My husband assembled it in less than an hour and the directions were very clear.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
Worse company I've encounter, owner is a racist he's stuck in the 1950 way of life and the daughter & husband smoke more cigarettes than and testing tube in a tobacco facility. Service sucks they have one poor individual working the entire warehouse and refuse to hire more help. They don't provide benefits and expect the worker to work like a slave with no sick days off. Locker
×