Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.
Dimensions (Note that, in English-speaking countries, even those commonly using metric measurements now, locker dimensions are usually clean numbers of inches or feet, while the corresponding metric measurements are uneven, involving decimal places when precision is required, presumably resulting from continued use of locker designs based on feet and inches, unchanged for decades other than for cosmetic features.):
Our keyed cabinet locks come with a variety of lock styles. Standard locks are simple to use, and you may already have a number of standard cabinet locks around your office. Tubular locks have a unique look, and can add an extra level of protection. Tubular cabinet locks are harder to pick open, and you’ll never be confused which key is which. The tubular key will stand out against everything else on your key ring for easy and quick access. Amazon.com offers many shipping features, including Free Shipping on eligible items, and fast next-day shipping for urgent requests.
In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes.[1] However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks. Locker CO
Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys. School Locker
Industry Tip: You can order lockers to match your school colors by having them painted in colorful two tones with the frame one color and the doors another. Another option is to match your combo locks with the color of your lockers; you can even have your school logo imprinted on your locks! The sky’s the limit with us so be creative in showing your school’s spirit and pride! Locker CO
Number of locking points: Locker doors may lock with either single- or three-point locking, but this is not normally chosen as a separate option, and the choice is usually dependent on the number of tiers in the lockers, or whether they are a high-security model, although some manufacturers do allow purchasers to specifically choose an option here that goes against their normal practice. Single-point locking locks the door at only the point where the latch engages with the door-frame, whereas three-point locking uses extensible steel rods to lock the top and bottom of the door as well. Locker Colorado

When you are looking to buy school lockers you’ll find that we are the industry leader. We take that title seriously, meaning that you can always expect superior expertise combined with friendly service and an unparalleled selection of school lockers for sale that will last a lifetime. Browse through our unrivaled offering of ready to ship lockers, offered in more sizes, colors and options than anywhere else, all readily available for purchase at below market prices. Locker CO
Shelving Rack & Lockers, Inc. has specialized in Warehouse Space Control since 1989. We maintain a large local stock of new and used storage equipment products from Ridg-U-Rak, Lyon, Penco, Akro-Mils, Rubbermaid, Louisville Ladders, J&L Wire Products, and more. Shelving Rack & Lockers is your one stop shopping source for all your storage equipment needs! We welcome orders of all sizes - small or large. Member of the Better Business Bureau. School Locker

Our impressive selection of lockers for school use includes hall lockers, kitchen staff, team rooms, gym areas, school locker rooms, shop classrooms and more. Our lockers have been to good use for decades in k-12 secondary schools, public, private and charter schools. Colleges and universities throughout the world feature our lockers in their establishments, providing flawless secure storage for students and staff alike. Even homeschools love our lockers to help keep school organized and separate from home. Locker CO
Quality Refurbishing Many of the old, wholesale lockers we have in stock have minimal damage and some are near brand-new condition. For lockers that need repairs, our unique multiple point inspection and repair process helps to refine these lockers to a high quality, salvaged state. We know you want to buy quality lockers and we will not be shipping out lockers that are not fully functional. To get the most out of your refurbished locker, we also offer tips on alternative ways you can utilize them. Don't want to have the same old wall locker look? Use one as a laundry room locker or a console table.
Terry, there are many storage unit places closer to the airport, but then of course you'd have to rent a car. DIA Self Storage, for example, is less than 10 miles away. You can google map Denver International Airport, then "search nearby" for "self storage units" if you think that's something you might want to do. http://www.coloradoselfstorage.com/ Locker CO
Rebecca, I remember a previous post that a visitor found storage at the bus station, so I called to see if still available, and it is. Lockers are $3 for the first hour and $1 per hour after that. It's difficult to find storage short term because of security/liability, esp. since 9/11. If you are staying at a hotel, they will often keep your luggage for you short term. Locker CO
Worse company I've encounter, owner is a racist he's stuck in the 1950 way of life and the daughter & husband smoke more cigarettes than and testing tube in a tobacco facility. Service sucks they have one poor individual working the entire warehouse and refuse to hire more help. They don't provide benefits and expect the worker to work like a slave with no sick days off. School Locker
We have metal lockers for sale, yes, metal lockers that are designed for many applications like first responders of all types, school corridor lockers, employee lockers, high school lockers, Athletic lockers Footlockers, and Stadium® lockers that are ideally suited for athletic team rooms to store helmets, uniforms and gear for many different sports.

Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood. School Locker
For longer term storage, there are many self storage units around the metro area. Not cheap, but then neither is paying extra baggage fees and lugging around extra stuff not needed for another leg of your trip, as it sounds like Terry might be doing. For example, I found "Downtown Denver Self Storage" with units starting at $45 a month. http://www.downtowndenverstorage.com/ Locker
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood. School Locker
While home shelving should never be used for heavy-duty applications, you may desire to use heavy duty metal shelving at home, in your garage or shed, where you may need to store large or heavy products or materials. We use world class vendors like Penco, Rivet Rite® and Clipper Shelving® to give you a clue about the quality of our Heavy Duty Industrial Steel Shelves for warehouse or storage requirements.
Worse company I've encounter, owner is a racist he's stuck in the 1950 way of life and the daughter & husband smoke more cigarettes than and testing tube in a tobacco facility. Service sucks they have one poor individual working the entire warehouse and refuse to hire more help. They don't provide benefits and expect the worker to work like a slave with no sick days off. Locker
Dimensions (Note that, in English-speaking countries, even those commonly using metric measurements now, locker dimensions are usually clean numbers of inches or feet, while the corresponding metric measurements are uneven, involving decimal places when precision is required, presumably resulting from continued use of locker designs based on feet and inches, unchanged for decades other than for cosmetic features.): Locker CO
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers. School Locker

It might be awkward, but please don't scroll past this. This Thursday we humbly ask you to defend Wikipedia's independence. Our 2019 fundraiser will be over very soon. 98% of our readers don't give; they simply look the other way. If you are an exceptional reader who has already donated, we sincerely thank you. If you donate just $2.75, Wikipedia could keep thriving for years. Most people donate for a simple reason—because Wikipedia is useful. If Wikipedia gave you $2.75 worth of knowledge this year, take a minute to secure its future with a gift to the Wikimedia Endowment. Show the volunteers who bring you reliable, neutral information that their work matters. Thank you. Locker Colorado


Rebecca, I remember a previous post that a visitor found storage at the bus station, so I called to see if still available, and it is. Lockers are $3 for the first hour and $1 per hour after that. It's difficult to find storage short term because of security/liability, esp. since 9/11. If you are staying at a hotel, they will often keep your luggage for you short term. Locker
If you’d like to make your new security system matching your cabinets, we can help you with décor ideas. Our products come in a wide variety of materials, colors and finishes. Our antique-styled cabinet locks will go perfectly in older, wooden furniture, and stainless-steel locks are ideal for steel filing cabinets. We even have store-quality locks for clear sliding-glass display cases.
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys. Locker Colorado
Our impressive selection of lockers for school use includes hall lockers, kitchen staff, team rooms, gym areas, school locker rooms, shop classrooms and more. Our lockers have been to good use for decades in k-12 secondary schools, public, private and charter schools. Colleges and universities throughout the world feature our lockers in their establishments, providing flawless secure storage for students and staff alike. Even homeschools love our lockers to help keep school organized and separate from home. Locker
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers. Locker
×