Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys. Locker Colorado

Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked. School Locker
Other advocates of lockerless schools also cite reasons such as reducing noise by eliminating the clang of dozens of locker doors,[1] or creating a more appealing environment aesthetically. It has also been claimed that removing lockers provides good training for students by forcing them to be more efficient in managing their books, and taking the time to plan what books they will need, and carrying only those ones. School Locker
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers. Locker
Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers. Locker

Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.

Operating in over 600,000 square feet, Salsbury Industries offers a complete line of metal lockers, vented lockers, extra wide lockers, modular lockers, wood lockers, plastic lockers, storage lockers, storage cabinets, storage shelving and benches. Most items ship within 1-2 business days from the date an order is received. Whether you are located around the block or around the world, you can count on Salsbury Industries to deliver quality products on time from our distribution facilities in Los Angeles, California. Locker
×